Description

Robot Window Cleaner With Sprayer Home Appliance Smart Remote Controls Square High Suction For Window Wall Washing Water Spray

Description

1,Intelligent cleaning routes, Clean your high-rise windows in a safe and easier way; Offers you a new way of window cleaning; W140 square robot window cleaner with stylish design and good performance;

2,Easy Operation: Control your robot in three simple ways: One touch Key- Remote. AI Smart Cleaning Modes: Multiple smart modes: in patterns of Z, N, or Z- to- N ,more than efficient , more than you expected.

N mode : Spray water on the lower side only ( NO Spray water on the upper side )

Z mode :Spray water on the Both side

3,Square Shape Covers More: W140 Covers maximumly 99% of the glass surface; Back to where it start when finished the work;

4,designed Mico Fabric Cloth with no hurt to glass surface; Available to frame and frameless glass,tables,and smooth floors/wall surfaces.

5, Multi-levels of Safety Guarantee: Multi-direction anti-falling sensors,with strong safety rope equipped;

The built-in UPS battery help robot suck on windows for 30minutes and send alarms if power supply is cut suddenly; Multi-condition Application: use W140 to clean internal/external windows of high-rise buildings/stores bathroom windows, or other flat surface like marble walls, ceramic walls.

please note:

N mode : Spray water on the lower side only

( NO Spray water on the upper side )

Z mode :Spray water on the Both side

Package list :

Robotic window cleaner support water spray function)

/Adapter/User Manual/Remote Control/Extension Cable/Cleaning Pads/Cleaning Solution/Safety Rope.

4pcs /8pcs/16pcs mops set , choose the one you need

PLEASE NOTED:

1)Not suitable for skylight and inclined cleaning!

2) Install the rag correctly

3) Ensure that the power connection is well, and tighten the power extension cord;

4) Place the machine on a vertical or horizontal clean surface, press once to turn on the power of the machine to attach it to the glass surface, and press again to start the machine.

5)If the rags is too dirty, W140 will stop automatically. This is a normal phenomenon. After changing the rag, W140 will work well as normally.we suggest you clean them manually first. Since the machine can’t completely replace manpower, please understand!

6) For key cleaning areas, you can choose the N+Z Cleaning Mode to cleaning twice, and use an appropriate amount of detergent. After wet Washing, replace a dry rag for cleaning to remove traces.

7）Please note , we can not ship the cleaning solution due to the shipping policy ,. you can buy it from your local store or use the dish soap instead. Please pay attention to the amount of cleaning solution, if the amount of cleaning solution is too much, it will leave streaks.Usually each side of the rag can be sprayed 4~8 times

8) If there is a sharp friction sound between the machine and the glass, the surface may be too dry. Please spray an appropriate amount of detergent on the cleaning surface or rag.

9) The window cleaning robot must be put on a safety rope before being used, and the extension cord must be connected, and it can work only after being powered on.

10) If the w140 is working well at first and suddenly slows down or stops, please change the rag before continuing to clean.